276°
Posted 20 hours ago

G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Universal fitting with internal thread CELLFAST IDEAL G1 / 2 "- G3 / 4", for water intake with external thread.

These situations are problematic in applications that require regular installation and removal of the pressure gauge. Often the 2nd P is left off because BSPT tapered threads are less common and BSP is assumed to be parallel unless otherwise specified. Compared with other same products in the market, this shower hose joint has thicker interface, explosion-proof and pressure-resistant, more durable. The threaded part(s) of plumbing fittings are usually made to a British Standard Pipe Thread size (BSP).Im trying to put a pressure gauge on a 55 gallon drum ,i put pressure in the tank but not one pressure gauge will work ,i put the gauge on the top of the tank ,right on the lid , and it wont give me the pressure . This is the source of the confusion, as people incorrectly think the size refers to the outside diameter of the male thread. The adapter has a built-in O ring seal which acts the same as bonded or dowty seal for sealing the 1/4 BSP (G1/4) thread end. Inch BSP - Bathroom basin taps and kitchen sink taps, radiator connections, shower hoses, old outside tap outlets, toilet cistern fill / float valves. British Standard Pipe ( BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external ( male) thread with an internal (female) thread.

Parallel (straight) threads, British Standard Pipe Parallel thread ( BSPP; originally also known as [1] British Standard Pipe Fitting thread/ BSPF and British Standard Pipe Mechanical thread/ BSPM), which have a constant diameter; denoted by the letter G. The Quick Star QS range offer a convenient push-in fitting system for compressed air and water with over 1000+ types of standard and function fittings.

To avoid the problem of awkward gauge positioning, use a “crush washer” and hand-tighten the connection. Some pressure connections also include a tapered shank which assists in the correct alignment of the bonded seal. The inner diameter of connector: 25mm(/G3/4inch), outer diameter: 20mm(G1/2inch), overall length: 34mm/1. Since finishing my business apprenticeship with WIKA Germany in 1985, I have worked in many different positions and areas. If the pressure is not going to exceed 16 bar we would suggest a John Guest PM010612E 6MM x 1/4″ straight threaded to tube adapter fitting.

S. and Canada – the pressure gauge will very likely have the straight threads of a British Standard Pipe Parallel (BSPP) connector, denoted by the letter G*.

The size was originally based on the inside diameter, measured in inches, of a steel pipe for which the thread was intended. Wherever they are manufactured, Hansgrohe products reflect the quality and meticulousness that makes the German manufacturing industry so famous.

If you have a gauge with a metric G1/2B thread and your port is NPT or vice versa, try to find an adaptor. Once the connector bottoms out to make the seal, the positioning of the instrument cannot be changed. Other options = Units with special voltages and/or 60 Hz possible, Higher operating pressures and greater volume flows on request, Water cooled condensers available (larger models only). I would like to know if a 1/2 inch NPT instrument connection would fit into a 1/2 inch BSP sample port or could we use a G 1/2 B connection instead? It's also silicone-free, so you can use it in no-contamination manufacturing units like soldering, special packaging or coating facilities.

The terminology for the use of G and R originated from Germany ( G for gas, as it was originally designed for use on gas pipes; R for rohr, meaning pipe. Compared with other same products in the market, this shower hose joint has thicker interface, explosion-proof and pressure-resistant, more durable, suitable for Grohe tap, ballfix valve, the adapter can be applied for 13mm EU taps and 15mm UK faucet, and with the rubber washer make more sealed and leak-proof.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment